Browse Client Types

Browse past lab clients by general industry sectors

Trial Number 2

Trial Purpose:

The purpose of this experiment is to determine the effectiveness of seven cleaners in removing rosin from glass substrates using heated immersion.

Date Run:

07/10/2020

Experiment Procedure:

Four glass coupons were obtained and weighed for each of the seven cleaners. One coupon was soiled with one rosin by applying the rosin to the bottom third of the coupon with a swab and a soiled weight was obtained. The cleaning solutions were prepared for heated immersion by the following concentrations and temperatures: Smart Solve 605 100% at 150°F, RB Degreaser Cleaner 20% at 180°F, Valtron SP 2275 2% at 150°F, SC Actisolv 50% at 120°F, Propylene carbonate 100% at 180°F, Dimethyl glutarate 100% at 180°F, and SC Maxisolv 100% at 120°F. Once cleaners reached the proper temperature, the coupons were submerged into their respective cleaners for 30 minutes. After 30 minutes had passed, coupons were allowed to air dry if needed and a final clean weight was obtained. Effectiveness of cleaning was determined for each solution.

Trial Results:

Cleaner Rosin Initial Weight of cont. Final Weight of cont. % Cont. Removed Overall % Removal
Smart Solve 605 1 0.5175 0.0048 99.07 97.01
2 0.354 0.0138 96.10
3 0.549 0.0165 96.99
4 0.3649 0.015 95.89
RB Degreaser Cleaner 1 0.3892 0.2438 37.36 27.93
2 0.4618 0.4509 2.36
3 0.3554 0.1386 61.00
4 0.3068 0.273 11.02
Valtron SP 2275 1 0.5012 0.4984 0.56 -0.52
2 0.3369 0.3378 -0.27
3 0.3735 0.3769 -0.91
4 0.3732 0.3786 -1.45
SC Actisolv 1 0.5025 0.5588 -11.20 0.24
2 0.4586 0.5431 -18.43
3 0.6233 1.1493 -84.39
4 0.3824 -0.0573 114.98
Propylene Carbonate 1 0.9206 0.7713 16.22 8.75
2 0.5596 0.587 -4.90
3 0.4738 0.132 72.14
4 0.6335 0.9404 -48.45
Dimethyl glutarate 1 0.6615 0.0017 99.74 97.47
2 0.6277 0.0532 91.52
3 0.4443 0.005 98.87
4 0.6316 0.0017 99.73
SC Maxisolv 1 0.3393 0.0087 97.44 73.24
2 0.3788 0.3842 -1.43
3 0.6693 0.0282 95.79
4 0.3397 -0.004 101.18

Success Rating:

Results successful using TACT (time, agitation, concentration, and temperature, as well as rinsing and drying) and/or other cleaning chemistries examined.

Conclusion:

Dimethyl glutarate and SmartSolve 605 were the only two cleaners that effectively removed all four rosin contaminants on the substrate within 30 minutes of heated immersion. 

Save Report as a PDF