Browse Client Types

Browse past lab clients by general industry sectors

Trial Number 14

Trial Purpose:

Clean ceramic floor

Date Run:

07/19/2016

Experiment Procedure:

Apply soil to 39” X 39”  clean ceramic floor, spreading 1g of soil onto even numbered tiles with a swab and odd tiles by dripping 1g of soil onto them (9g per floor).  Allow the floor to dry for 24h.  The tester then cleans the floor using paper towels and a spray bottle filled with water, beginning by the 1st tile.  Tester continues to clean until they feel they have finished.  The time it takes for the tester to clean the floor is recorded. 

To evaluate total soil removal, a visual observation will be made.  This observation will be an estimation of the % soil removed from each tile by comparing before and after pictures of the floor.  In addition to this rating, observers will also be asked to rate the overall cleanliness of the floor from 1-5 (1 being no soil remaining).

Tile numbers

9 4 3
8 5 2
7 6 1

                 ^^^^^ Tester starts here

Trial Results:

The floor was soiled and cleaned once.

  • There was some remaining Cola on the floor left when the cleaning water dried. 
    • The floor was not rated as completely clean because of this.

 Percent removal Trial 1

Time: 30s

(Ex: 95% means that 5% of the initial soil remained on the tile.)

 Observer 1 – rating: 1.5                     

97% 92% 100%
100% 100% 95%
100% 98% 98%

Observer 2 – rating: 1

100% 100% 100%
100% 100% 100%
100% 100% 100%

 

 

 .

 Observer 3 – rating: 2

95% 98% 95%
95% 95% 95%
95% 95% 98%

Success Rating:

A cleanliness study, addressing only various analytical techniques.

Conclusion:

The manually cleaned floor was rated as less clean than the floor cleaned by the Braava unit with an average overall rating of 1.5 vs the Braava unit’s average overall rating of 1.

Save Report as a PDF