Browse Client Types

Browse past lab clients by general industry sectors

Trial Number 0

Trial Purpose:

To evaluate supplied products for all purpose cleaning following GS 37 requirements

Date Run:

02/12/2015

Experiment Procedure:

Three sets of nine ceramic, stainless steel, and polycarbonate coupons were weighed and then coated with the Hucker's Soil Formulation (Jif Creamy peanut butter 9.2%, salted butter 9.2%, Arrowhead Mills stone ground wheat flour, 9.2%, egg yolk, 9.2%, evaporated milk 13.8%, distilled water 45.8%, Printer's ink with boiled linseed oil 0.9%, saline solution 2.7%) using a handheld swab and allowed to dry for 2 hours at room temperature.

The contaminated coupons were weighed again to determine the amount of soil added. Three coupons were placed into a Gardner Straight Line Washability unit. A Kimberly-Clark Wypal x60 reinforced paper towel was attached to the cleaning sled and soaked with 1 spray of cleaning solution. Each coupon was sprayed 1 time with the same cleaning solution. The cleaning unit was run for 20 cycles (~33 seconds). Final weights were recorded, efficiencies were calculated and recorded.

Trial Results:

Cleaner  Initial wt Final wt % Removed
NFMRP 2V 1:128 –Ceramic      
  0.5016 0.0489 90.25
  0.5172 0.0121 97.66
  0.5055 0.0907 82.06
NFMRP 2V 1:128 – Plastic      
  0.4934 0.2565 48.01
  0.5096 0.0294 94.23
  0.5300 0.0242 95.43
NFMRP 2V 1:128 - Painted Steel      
  0.6084 0.0542 91.09
  0.5263 0.1335 74.63
  0.5058 0.1132 77.62
NFMRP 2V 1:64 –Ceramic      
  0.4868 0.2281 53.14
  0.5304 0.0960 81.90
  0.4955 0.0730 85.27
NFMRP 2V 1:64 – Plastic      
  0.4302 0.0024 99.44
  0.5311 0.0166 96.87
  0.4997 0.0260 94.80
NFMRP 2V 1:64 - Painted Steel      
  0.5100 0.0538 89.45
  0.5001 0.0385 92.30
  0.5013 0.1941 61.28
7th Generation – Ceramic      
  0.4811 0.0813 83.10
  0.5314 0.0676 87.28
  0.5054 0.0563 88.86
7th Generation – Plastic      
  0.4530 0.0068 98.50
  0.4874 0.0032 99.34
  0.5124 0.0042 99.18
7th Generation - Painted Steel      
  0.4904 0.0447 90.88
  0.5296 0.0504 90.48
  0.4867 0.0329 93.24
409 –Ceramic      
  0.4572 0.0817 82.13
  0.5775 0.0428 92.59
  0.5718 0.0436 92.37
409 – Plastic      
  0.5184 0.0124 97.61
  0.4525 0.0105 97.68
  0.4993 0.0410 91.79
409 - Painted Steel      
  0.4873 0.0956 80.38
  0.5106 0.0292 94.28
  0.5134 0.0393 92.35

Success Rating:

A cleanliness study, addressing only various analytical techniques.

Conclusion:

The 1:64 dilution of NFMRP exhibited an effective level of cleaning for plastic, while the 1:128 dilution was effective on ceramic. The 409 and 7th Generation products exhibited effective cleaning for each surface.

Save Report as a PDF