Browse Client Types

Browse past lab clients by general industry sectors

Trial Number 10

Trial Purpose:

To evaluate top two products on thirds supplied contaminant using heated immersion cleaning.

Date Run:

09/24/2008

Experiment Procedure:

The top two products were selected from the previous trial based on success on removing two of the supplied soil using heated immersion cleaning. Both were used at full strength based on vendor recommendations. Beakers were heated to 130 F on a hot plate. Six preweighed steel coupons were coated with the rust preventative VCI 325 using a hand held swab. Coupons were weighed again to determine the amount of soil added. Three coupons were cleaned in each solution for 10 minutes using stir bar agitation. Coupons were rinsed for 15 seconds in tap water at 120 F and dried using compressed air at room temperature for 30 seconds. Final weights were recorded and efficiencies calculated.

Trial Results:

The Bean-e-doo product removed over 95% of the rust preventative within 10 minutes of immersion cleaning. The Smart Solve 605 removed around 80%. The table lists the amount of soil added, the amount remaining and the efficiency for each coupon cleaned.

Cleaner Initial wt Final wt % Removed
Smart Solve 605
  0.0983 0.0213 78.33
  0.1442 0.0206 85.71
  0.0931 0.0245 73.68
Bean-e-doo
  0.1160 0.0069 94.05
  0.0893 0.0058 93.51
  0.1263 0.0032 97.47

Success Rating:

Results suggest a scale-up feasible match for cleaning chemistry and equipment. Pilot plant study with actual parts recommended.

Conclusion:

The Bean-e-doo product removed over 90% of all three contaminants using heated immersion cleaning and over 95% using heated ultrasonic cleaning. The Smart Solve 605 removed 90% on two of the three contaminants using heated immersion and removed greater than 90% on all three using heated ultrasonics. Piloting of the two products should take place next.

Save Report as a PDF