Browse Client Types

Browse past lab clients by general industry sectors

Trial Number 6

Trial Purpose:

To evaluate selected products effectiveness to remove selected soils from selected substrates.

Date Run:

09/20/2010

Experiment Procedure:

Three products (GPS 1, GPS 2 & GPS 3) that were provided by the client were evaluated for their effectiveness to remove soil from Painted Steel, Wood and Polyurethane coated wood substrates. Using materials provided by the client and in combination with a conventional product chosen by the client to determine the effectiveness of the clients’ products to remove soil compared to a conventional product.

For this evaluation a total of 18 Stainless Steel and 18 Wood coupons and 18 wood coupons coated with polyurethane were weighed and coated with the appropriate soil. Nine Stainless Steel, nine wood and nine polyurethane coated wood coupons were contaminated with Bowman Industrial Finish and nine Stainless Steel, nine wood and nine polyurethane coated wood coupons were contaminated with Daye Black Ink. After allowing time to dry, coupons were weighed a second time to determine the amount of soil added. Each set of three coupons were cleaned using abrasion testing using the following application and testing procedure.

First the cleaning solution was applied to the coupon and the cleaning pad and allowed to set for 1 minute (60 seconds) followed by 20 cycles of abrasive cleaning. One minute setting (dwell) time was used while a new cleaning pad was placed in the machine and run for five cycles to simulate removal of the cleaning agent from the surface. Final weights were recorded and efficiencies were calculated.

Trial Results:

Few products were very successful using abrasion to remove the soils utilizing client provided cleaning products. The nature of the products led to changes in the weights of the coupons, so a visual ranking was utilized to evaluate the ability of the cleaners provided to achieve a clean surface. Additional testing is recommended to provide more substantial quantitative data for the cleaners. The table lists the perceived ability of the cleaner as observed individually by different members of the SCL Laboratory and as a composite for both substrates.

      Cleaner Ranking Wood 
    Product Team Member 1 Team Member 2 Team Member 3 Ave
Wood uncoated Ink 1 GPS1 (100%) 2 1 1 1.3
2 GPS2 (100%) 1 2 2 1.7
3 GPS3 (100%) 2 3 3 2.7
Wood coated Ink 1 GPS1 (100%) 1 1 1 1
2 GPS2 (100%) 2 2 2 2
3 GPS3 (100%) 3 3 2 2.7
Wood uncoated Spray Paint 1 GPS1 (100%) 3 1 2 2
2 GPS2 (100%) 1 3 1 1.7
3 GPS3 (100%) 2 2 2 2
           
Wood coated Spray paint 1 GPS1 (100%) 1 1 1 1
2 GPS2 (100%) 2 2 2 2
3 GPS3 (100%) 3 3 2 2.7

.

Cleaner Initial wt Final wt % Removed Average Rank
Segeit_GPS1_Stainless coupon_Ink          
0.3451 0.1288 62.68   2
0.3636 0.148 59.30    
0.215 0.1341 37.63 53.20  
Segeit_GPS2_Stainless coupon_Ink          
0.3432 0.0057 98.34   1
0.3661 0.0088 97.60    
0.2084 0.0141 93.23 96.39  
Segeit_GPS3_Stainless coupon_Ink          
0.3582 0.1629 54.52   3
0.2212 0.1372 37.97    
0.3272 0.2347 28.27 40.26  
Segeit_GPS1_Stainless coupon_Spray Paint         1
0.0745 0.0231 68.99    
0.0602 0.0217 63.95    
0.0697 0.0377 45.91 59.62  
Segeit_GPS2_Stainless coupon_Spray Paint         2
0.0729 0.0234 67.90    
0.0724 0.0254 64.92    
0.0678 0.0415 38.79 57.20  
Segeit_GPS3_Stainless coupon_Spray Paint         3
0.0787 0.069 12.33    
0.0648 0.0395 39.04    
0.0686 0.0459 33.09 28.15  

Success Rating:

A follow up test, usually based on company input.

Conclusion:

GPS 1 and GPS 2 both had a composite score of 1.5 when substrates were measured together while GPS 3 showed a clear inability to meet the same measure of efficiency. The cleaners, GPS 1 & 2 show very similar abilities between the substrates and deserve more attention in testing over a broader range of substrates.

Save Report as a PDF