Browse Client Types

Browse past lab clients by general industry sectors

Trial Number 2

Trial Purpose:

To evaluate the supplied products for all purpose cleaning using manual cleaning.

Date Run:

04/16/2010

Experiment Procedure:

The supplied cleaning products was diluted with DI water to vendor recommended concentration for all purpose cleaning (3%). A second product was prepared to a 2% dilution.

Preweighed ceramic, plastic G-10 and painted steel coupons were coated with Hucker's Soil Formulation (Jif Creamy Peanut Butter 9.2%, Salted Butter 9.2%, Arrowhead Mills stone ground wheat flour 9.2%, Egg Yolk 9.2%, Evaporated milk 13.8%, Distilled water 45.8%, Printer's ink with boiled linseed oil 0.9%, Shaws saline solution 2.7%) using a handheld swab and allowed to dry for 24 hours at room temperature. The contaminated coupons were weighed again to determine the amount of soil added.

Three coupons were placed into a Gardner Straight Line Washability unit. A Kimberly-Clark Wypal reinforced paper towel was attached to the cleaning sled and soaked with 5-7 sprays of cleaning solutions. Each coupon was sprayed 7-10 times with the same cleaning solution. The cleaning unit was run for 20 cycles (~33 seconds). At the end of the cleaning, coupons were wiped once with a dry paper towel. Final weights were recorded, efficiencies were calculated and recorded.

Trial Results:

Both products were effective at removing the Hucker’s soil from the three surfaces using manual wiping. The Product 1 resulted in the higher efficiency, removing more than 90% of the Hucker’s soil. The table lists the amount of soil added, the amount remaining after cleaning and the calculated efficiency for each coupon cleaned.

Cleaner Initial wt Final wt % Removed
DeltaGreen - ceramic      
  0.6378 0.0166 97.40
  0.5169 0.0161 96.89
  2.9337 0.0023 99.92
DeltaGreen - painted steel      
  0.0656 0.0083 87.35
  0.2530 0.0089 96.48
  0.0565 0.0101 82.12
DeltaGreen - plastic      
  0.0648 0.0014 97.84
  0.0362 0.0036 90.06
  0.0312 -0.0001 100.32
3Rs - ceramic      
  3.9951 0.2482 93.79
  3.1257 0.2251 92.80
  0.6473 0.0025 99.61
3Rs - painted steel      
  0.0455 0.0102 77.58
  0.0346 0.0087 74.86
  0.0332 0.0034 89.76
3Rs - plastic      
  0.0374 0.0002 99.47
  0.0670 0.0134 80.00
  0.0746 0.0080 89.28

Success Rating:

A follow up test, usually based on company input.

Conclusion:

The supplied product had an overall average efficiency over 85% and performed as well as the conventional cleaning product.

Save Report as a PDF