Browse Client Types

Browse past lab clients by general industry sectors

Trial Number 2

Trial Purpose:

To evaluate selected product on supplied parts.

Date Run:

11/29/2006

Experiment Procedure:

One product was selected from the on-site visit. The product was diluted to 5% using DI water in 2000 ml beaker and heated to 130 F in a Branson 3510 ultrasonic tank filled with water. The solution was degassed for 5 minutes. A small, slotted basket was filled with dirty parts and immersed into the beaker. Parts were cleaned for 2 minutes using 40 kHz ultrasonic energy. Following cleaning, the parts in the basket were immersed into a two-stage heated tap water rinsing process. Parts were agitated for 15 seconds in each of the two rinse beakers. The cleaned and rinsed parts were then emptied into a large basket with slots to dry. In addition, excess water was removed by both shaking the larger basket of parts and through compressed-dry air at room temperature for 1 minute. Observations were made.  Parts were sent back to client for final evaluations.

Trial Results:

The parts looked very clean after two minutes of cleaning. No visible signs of oil were present. Likewise, following wipe testing with a white swab no oil was present. Photographs were also taken of each stage of the cleaning process.

Success Rating:

Results suggest a scale-up feasible match for cleaning chemistry and equipment. Pilot plant study with actual parts recommended.

Conclusion:

Sea Wash Blue at 5% for two minutes removed most of the oil that was on the parts. Parts were sent back for client approval.

Save Report as a PDF