Browse Client Types

Browse past lab clients by general industry sectors

Client #207

Related Images

Project Number 1

Summary:

Immersion cleaning had little effect on the dry lubricant with the selected cleaners. Ultrasonic energy was the used with the most effective products. All five cleaners (Brulin Corporation Brulin 815 GD, Gemtek Products SC Aircraft & Metal Cleaner, US Polychem Corporation Polyspray Jet 790 P, Oakite Products Inproclean 3800 and International Products Corporation Micro 90) were successful in removing over 95% of the lubricant using ultrasonic energy. In addition, two client requested products (Valtech Corporation MD 6000 and Valtron SP 2500) were tested and removed most of the lubricant through immersion cleaning only. Ultrasonic cleaning improved the efficiency of both cleaners. The SP 2500 needed less than 1 minute to remove nearly all the lubricant from the coupons. The MD 6000 removed most of the lubricant in 2 minutes but left residual amounts around the edges were the soil loading was the highest.

Test Objective:

To remove graphite-based dry lubricant from inner lumen of hypotube

Product Use:

To deliver fluids
Trial Number Date Run Purpose Success Rating
0 06/02/2003 To identify cleaning solutions for removing dry lubricant from nickel surfaces Results successful using TACT (time, agitation, concentration, and temperature, as well as rinsing and drying) and/or other cleaning chemistries examined.
1 06/02/2003 To evaluate cleaners using ultrasonic energy Results successful using TACT (time, agitation, concentration, and temperature, as well as rinsing and drying) and/or other cleaning chemistries examined.
2 06/05/2003 To determine a methodology to determine if parts are clean A cleanliness study, addressing only various analytical techniques.
3 06/13/2003 To evaluate client requested cleaning products. A follow up test, usually based on company input.
4 06/13/2003 To evaluate client supplied cleaners using ultrasonic energy A follow up test, usually based on company input.
5 06/13/2003 To evaluate one of the client requested products on the supplied parts A follow up test, usually based on company input.